污染控制技术及原理

  • 李日强,赵由之.SBR法处理氯丁橡胶生产废水的研究[J].环境科学学报,2006,26(5):803-807

  • SBR法处理氯丁橡胶生产废水的研究
  • Study on neoprene wastewater treatment with sequencing batch reactor process
  • 基金项目:山西省科技攻关资助项目(No.021185)
  • 作者
  • 单位
  • 李日强
  • 山西大学环境与资源学院, 太原 030006
  • 赵由之
  • 中国科学院地球化学研究所, 贵阳 550002
  • 摘要:采用SBR法对氯丁橡胶生产废水进行了处理,研究了不同充水时间、反应时间、沉淀时间、闲置时间和曝气方式对处理效果的影响.结果表明,当进水CODCr为1020mg·L-1左右,最佳的充水时间为1h、反应时间为4h、沉淀时间为2h、排水时间为0.5h、闲置时间为0h、曝气采用非限量曝气,出水CODCr达100mg·L-1以下,CODCr去除率达90%以上.
  • Abstract:The neoprene wastewater was treated with sequencing batch reactor (SBR) process, and the parameters affecting treatment efficiency were examined including influent time, reaction time, sedimentation time, idle time and aeration mode. The results showed that removal rate of CODCr was higher than 90% from about 1020 mg·L-1 to below 100 mg·L-1 under the optimal condition of influent time for 1h, the reaction time for 4h, the sedimentation time for 2 h, the drainage time for 0.5 h, the idle time for 0h and aeration over influent.

  • 摘要点击次数: 1535 全文下载次数: 2626